Why my Wireless Printer not Answering Back?

0 Comments
Printer Repair Bridgeport

Printers are one of the most used machines in commercial area as well as at personal space. But, people often face problems with the wireless printers stating that their printers are not responding? The most common mistake they made is that they place their printer out of the reach of Wi-Fi signal.

Thus, your printer and laptop both must be connected to the same network and must have been placed with in good range of Wi-Fi signals. Also, make sure to remove the obstruction between your router and printer such as – walls, and doors, cupboards, etc.

If you are not able to understand the issue even after placing your printer within the good range of router then don’t panic and feel free to contact Printer Repair Bridgeport. You can also contact on the toll-free number +1(844) 245-7077 and get either on-call solution or on-site solution instantly.

Or you can read and try all the methods mentioned below for resolving the issue on your own:

  1. Pick the Right Spot for Your Printer –

As we discussed above, you have to make sure that your printer is not too far away from your router irrespective of being in the same room. Though, the Wi-Fi signals are invisible but the impairments to those signals are often in plain view. Also, there are many things in one’s room which can weaken the Wi-Fi signals. And, to save up some space you have positioned your printer under any table or desk or closet then move it out and cut the barriers to Wi-Fi signals.

  1. Check your Printer’s Queue –

It is also possible that due to error in print jobs may be the reason behind your printer not responding. All you have to do is to cancel all the on-going jobs. Also, a large document takes more time to download and print as compare to average document sizes.

  1. Reboot Your Printer –

Unplug your printer and wait for a minute or two. Again, plug all the cables into your printer and restart your printer. If you are satisfied by now then you can sit back and relax. But if you not then you can either call toll free number +1(844) 245-7077 or search Printer Repair Wilmington in your browser to get the best service.

  1. Keep your Firmware up-to-date –

When your printer firmware gets updated all the bugs, vulnerabilities, and other issues including the connectivity problems. But if you haven’t updated your firmware for a long time then this might be your chance to do so.

  1. Reset the Printer –

It is the only way left when all the other methods fail. You have to clear every setting, login information and other details and re-enter all the information again. So, unplug your printer from all power cables and USBs wait for few minutes and reestablish the connection by plugging power cables and performing other necessary steps to set up Wi-Fi connection. We hope your problem has been resolved by now, but if not then you can contact the toll-free number +1(844) 245-7077 and get on-site solution instantly by searching Printer Repair Bridgeport.     

Leave a Reply

Your email address will not be published. Required fields are marked *