Printers are one of the most used machines in commercial areas as well as at personal spaces. But, people often face problems with wireless printers stating that their printers are not responding. The most common mistake they made is that they place their printer out of the reach of the Wi-Fi signal.
Thus, your printer and laptop both must be connected to the same network and must have been placed within a good range of Wi-Fi signals. Also, make sure to remove the obstruction between your router and printer such as – walls, doors, cupboards, etc.
If you are not able to understand the issue even after placing your printer within good range of the router then don’t panic and feel free to contact Printer Repair Bridgeport. You can also contact the toll-free number +1(928) 514-2464 and get either an on-call solution or an on-site solution instantly.
Or you can read and try all the methods mentioned below for resolving the issue on your own:
Wireless Printer Not Answering Back Troubleshooting steps
- Pick the Right Spot for Your Printer –
As we discussed above, you have to make sure that your printer is not too far away from your router irrespective of being in the same room. Though the Wi-Fi signals are invisible the impairments to those signals are often in plain view. Also, there are many things in one’s room which can weaken the Wi-Fi signals. And, to save up some space you have to position your printer under any table or desk or closet then move it out and cut the barriers to Wi-Fi signals.
- Check your Printer’s Queue –
It is also possible that errors in print jobs may be the reason behind your printer not responding. All you have to do is to cancel all the ongoing jobs. Also, a large document takes more time to download and print as compared to average document sizes.
- Reboot Your Printer –
Unplug your printer and wait for a minute or two. Again, plug all the cables into your printer and restart your printer. If you are satisfied by now then you can sit back and relax. But if you not then you can either call the toll-free number +1(928) 514-2464 or search Printer Repair Wilmington in your browser to get the best service.
- Keep your Firmware up-to-date –
When your printer firmware gets updated all the bugs, vulnerabilities, and other issues including connectivity problems. But if you haven’t updated your firmware for a long time then this might be your chance to do so.
- Reset the Printer –
It is the only way left when all the other methods fail. You have to clear every setting, login information and other details and re-enter all the information again. So, unplug your printer from all power cables and USBs wait for a few minutes and re-establish the connection by plugging power cables and performing other necessary steps to set up a Wi-Fi connection. We hope your problem has been resolved by now, but if not then you can contact the toll-free number +1(928) 514-2464 and get an on-site solution instantly by searching Printer Repair Bridgeport.